Gas Hunter Natural Gas, O2, CO & Pressure Measurement
The Gas Hunter is a versatile instrument capable of measuring levels of combustible gas, O2, CO, and pressure.
In the field, the Gas Hunter does the job of seven individual instruments to optimize technician efficiency in leak survey operations and customer service calls. It is able to sniff out combustible gases from part per million levels to 100% by volume through auto-ranging. But there's more. The Gas Hunter is also able to measure the levels of %O2 and ppm CO, and measure pressure in the range of 0.0 to 27.7 inH2O.
Features:
- Multiple functions: seven instruments in one small package
- Auto-zero at start up
- Auto-ranging in combustible-gas mode
- 3 ranges of sensitivity - PPM, LEL and % gas by volume
- Patented sensor technology: one combustible sensor for PPM thru 100% gas by volume
- Confined space protection for 3 gases
- Audible and visual alarms
- Pressure and draft measurement
- Ambient and air-free carbon monoxide capability
- Intrinsically safe
Specifications:
- Measurement Ranges:
- Natural Gas:- 0-2,500 ppm
- 0.2-5.0 % vol. gas
- 0-99 % vol. gas
- 0.01 to - 0.99
- 1.0 to -9.9
- 10 to -28 inH2O
- Oxygen: 0.0 to 25.9% by vol. - Calculated Ranges:
- CO Air-Free: 0 to 9,999 ppm - Accuracy:
- Natural Gas:- Low Range: ±0.3% gas
- High Range: ±3% gas
- Carbon Monoxide: ±5% or reading or ±3 ppm, whichever is greater
- Oxygen: ±0.5% O2 - Warm Up Time: 1 minute approx.
- Response Time (to 95% of final value):
- Natural Gas <20 seconds
- Oxygen: <20 seconds
- Carbon Monoxide: <40 seconds
- Pressure <3 seconds - Environmental Conditions: -4 to +122°F (-20 to +50°C), 10 to 95% Relative Humidity (non-condensing)
- Size: 4.7 x 2.3 x 4.35 in. (11.9 x 5.8 x 10.9 cm)
- Weight: 29 oz (822 g)
- Batteries: 3 - AA alkaline
- Battery Life: Typically 6 to 8 hours of continuous operation, and well over a week of operation when used from 50 to 60 minutes a day
- Agency Approvals: CE Mark and MET lab certified to UL913 and CSA C22.2-157, intrinsically safe for use in Class I, Division 1, Groups A, B, C & D hazardous areas
- Warranty: 1 year, including sensors
Ordering Information
Part Number | Description |
55-8001 | Gas Hunter with Kit includes: 4' polyurethane coiled hose with 10" aluminum probe assembly, 3 'AA' Alkaline batteries, methane/pressure reference card and 2 inlet filters. |
55-3001 | 30" Plastic Bar Hole Probe |
3474-1210 | 30" Aluminum Bar Hole Probe |
55-0063 | Water Trap / Filter Assembly for barholing applications |
07-1644 | Replacement Filter for Water Trap/Filter Assembly (package of 3) |
55-0045 | Inlet Filter, for instrument (package of 2) |
5500-7100 | Foam Filters, for probe (box of 10) |
5500-7400 | Charcoal Filters, for probe (box of 10) |
55-8005 | Flue Probe Assembly with sample and draft lines, a water trap / filter assembly and quick connect fittings |
55-0038 | Pressure Tubing Assembly with 1/8" Quick Disconnect Socket |
55-0087 | Soft Carrying Case with Shoulder Strap |
55-0039 | Hard ABS Plastic Carrying Case |
55-8002 | Calibration Kit (gas not included) |
55-0068 | Calibration Gas, 2.5% Methane, 100 ppm CO, 18.5% O2 in Nitrogen, 103 L |
55-0060 | Calibration Gas, 100% Methane, 58 L |
51-1121 | Calibration Gas, 2.5% Methane in Air, 103 L |
51-7131 | Calibration Gas, 20.9% O2 in Air, 103L |
55-0040 | Combustible Gas Sensor |
54-7001 | Oxygen Sensor |
54-7003 | Carbon Monoxide Sensor |