Model 3792   Facility Monitoring Laser Particle Sensor

Facility Monitoring Laser Particle Sensor

Cleanroom Monitoring - Pharmaceutical, Aerospace/ Defense, Electronics, MEMS, Semiconductor

Food Processing
Medical / Hospitals



Model 3792-01 3792-03
Sampling Air Flow 2.83 l/min 1 l/min
Sensitivity 0.2 m, 0.3 m 0.2 m, 0.3 m
Condensation Range 1,000,000 pieces/cf 3,000,000 pieces/cf

Output Type A RS-485 Output
Connector Type RS-485 IN Modular Connector 8-pin (rear panel) RS-485 OUT Modular Connector 8-pin(rear panel)
Transmission Setting: DIP switch 8-pin(front panel)
Address Setting(0-999): Rotary DIP switch, 10 positions x 3 (front panel)
Multiplexer Output
Connector Type: BNC Connector
  Type B 4-20mAOutput
Output: Data for 2 particle size ranges and Sensor Status
Connector Type: D-sub Connector 9-pin (rear panel)
Indicative Resolution: 1/1000 of the full scale
Full Scale: 3 levels (100, 10,000/1,000,000 pieces / cf)
Full Scale Selection: Sliding DIP switch 8-pin(front panel)
Multiplexer Output
Connector type: BNC Connector
Display 5-Digit LCD Optional Display unit available (needs to be exchanged with the supporting casing) Condensation Display (Running Average for pre-set time) SIZE key gives selection of Particle size range to monitor
Status LED PARTICLE: Turn Red when picking the signal of the particle
STATUS: Keep Green when Optics are operating normally.
FLOW: Turn Green when Sampling Flow rate is normal
Power Supply AC 100V/240V
Dimensions 4.6" x 5.3" x 6.7" (118135170 mm) (Excluding sampling air nozzle on the upper surface and other interface outfit.
Also excludes rubber feet.)
Weight Approx. 6.6lbs (Approx. 3kg)